author-img
Jayde Balderston
Henry Schein Content Strategist
Jayde Balderston
Henry Schein Content Strategist

Ensure you are providing the best endodontic treatment for your patients using our comprehensive step-by-step endodontic workflow guide, featuring product recommendations from trusted brands.

Are You Providing The Best Endodontic Care For Your Patients?

As a dental professional, you will undoubtedly be familiar with endodontics: the branch of dentistry that deals with saving infected teeth from being extracted by diagnosing, treating, and preventing dental pulp and root canal issues. In fact, over the course of your career in dentistry, you will likely encounter and treat many endodontic cases.

With such high demand for endodontic treatments, it is vital that you can provide excellent care for your patients. And to do that, you need to have the right products, supported by a structured and efficient workflow..

Consistency across each stage, from diagnosis through to obturation and restoration, plays a key role in improving treatment predictability and long-term outcomes.




    
        

            Stage
            Products
            Workflow Role
        

        

            1. Diagnosis
            X-rays, CBCT imaging, endo spray, heated plugger
            Support accurate assessment and confident treatment planning.
        

        

            2. Magnification
            Dental microscopes, loupes, illumination systems
            Improve visibility, precision, and canal location.
        

        

            3. Access
            Access burs, Gates Glidden drills, endodontic access kits
            Help create efficient access to the pulp chamber and canals.
        

        

            4. Shaping
            Hand files, K-files, rotary files, reciprocating files, NiTi files, endodontic motors, apex locators
            Support controlled canal preparation and working length accuracy.
        

        

            5. Irrigation and Debridement
            Sodium hypochlorite, EDTA solution, sterile syringes, side-vented irrigation needles, irrigating needles
            Help disinfect canals and remove debris before filling.
        

        

            6. Drying
            Absorbent paper points, colour-coded paper points
            Prepare canals for effective sealing and filling.
        

        

            7. Sealers
            Calcium silicate sealers, bioceramic sealers, resin-based sealers
            Help create a reliable seal and reduce reinfection risk.
        

        

            8. Obturation
            Gutta-percha points, cold obturation materials, heated obturation devices, downpack devices, backfill devices
            Support effective canal filling with warm or cold techniques.
        

        

            9. Restoration
            Composite materials, bonding agents, core build-up materials, posts, crowns, restorative instruments
            Protect the treated tooth and support long-term success.
        

        

            10. Retreatment and Complications
            Retreatment files, ultrasonic tips, solvents, magnification, CBCT imaging, irrigation products
            Help manage complex cases and address failed treatment.
        

        

            11. Workflow Optimisation
            Integrated endodontic motors, apex locators, complete file systems, procedure kits, digital imaging, product bundles
            Streamline treatment and improve consistency across cases.
        

    





Optimising Your Endodontic Workflow With Henry Schein


At Henry Schein, we offer a wide range of products that covering the entire endodontic workflow, from files to sealers, and multiple obturation techniques. By following our step-by-step endodontic workflow, you can achieve enhanced, consistent results for your patients.
1. Diagnosis


The initial step in the endodontic process involves diagnosis of the issue. Typically, patients report pain or discomfort in a specific tooth or region, prompting a comprehensive examination. During this process, you must establish whether an endodontic procedure is indicated.


Various diagnostic tools and techniques can be employed to assess the tooth and the surrounding structures, allowing for the identification of the underlying cause. This crucial step enables the development of an appropriate treatment plan, tailored to the individual patient's needs, while also helping determine case complexity and treatment approach.


For reliable diagnosis, a radiograph is required, which can be carried out by the traditional use of an X-ray, or a CBCT in more complex cases.
image
image-container
When should you use CBCT in endodontics?
CBCT is typically used in complex cases, retreatments, or when conventional radiographs do not provide sufficient anatomical detail.


Endo spray and a heated plugger can also be used to verify whether the patient has reversible or irreversible pulpitis.
2. Magnification


Successful endodontic treatment relies on the ability to visualise the pulp and canals accurately. To achieve this, the use of a microscope is essential. 


The microscope plays a crucial role in magnifying the operative field, allowing you to obtain a detailed view of the tooth's internal structure. By providing enhanced visualisation, the microscope aids in locating and treating the root canal system effectively. 


Enhanced magnification supports:


    
    
  • Improved canal detection. 
    • 
    
  • Greater procedural accuracy. 
    • 
    
  • Reduced risk of missed anatomy.
    • 



At Henry Schein, we offer a range of microscopes which deliver exceptional visualisation capabilities for clarity during endodontic procedures.


4. Shaping


After you’ve gained access, it's time to shape the canals to remove the pulp and any bacteria or debris from the root canals. You will need to work carefully and thoroughly to ensure all pulp tissue is removed, leaving the canals clean and free from infection.


For the best possible shaping, you should have a range of files available for use, providing you with a suitable solution, no matter the canal shape. Creating a glide path prior to rotary instrumentation can significantly reduce stress on files and improve shaping outcomes.


Rotary and reciprocating systems may be selected depending on canal anatomy and clinician preference.


The Endoflex K-file range is flexible enough to navigate anatomy, allowing you to create a sufficient glide path, or to apically gauge. They can also be used alongside the BA Optima or the EDGEAPEX HP motors with built-in apex locators which allow you to accurately find the working length. 


For the shaping and finishing phases of preparation, EdgeEndo’s extensive range of products includes a large variety of heat-treated NiTi files, complete with high cyclic fatigue resistance and flexibility – ideal for shaping canals of all complexities.


Edge Endo
Find out how Edge Endo files can save your practice money and perform as well as your current files
image-container
What are the differences between rotary and reciprocating files?
Choosing the ‘right’ file is as much to do with individual preference as it is to do with the clinical case. In rotary file systems, the file rotates down the canal to the apex uninterrupted, offering quick and efficient shaping which can in turn reduce chair time and improve patient experience. In reciprocating file systems, the file cuts in a back-and-forth motion, making it simple to use, and often offering more flexibility and greater resistance to cyclic fatigue.
image-container
What is the most effective irrigation method?
A combination of sodium hypochlorite and EDTA, supported by activation, is widely used to achieve effective canal disinfection.
6. Drying


After the root canals have been cleaned and shaped, it's essential to dry them thoroughly before sealing and filling to optimise sealer adhesion and maximise treatment longevity.


It's important to work carefully and take the necessary time to ensure that the canals are completely dry before moving on to the next stage of the endodontic process. By doing so, you can maximise the effectiveness and lifespan of the filling, to deliver the best possible outcome for your patient. 


 EdgeEndo paper points are easy to use and highly absorbent, making them perfect for the delicate work of drying the canal. 


Discover the full EdgeEndo range


Alternatively, Maxima paper points have colour coded tips denoting size for ease of use.
7. Sealers 


Just like coronal seals, sealing off the accessory and lateral canals and the apical foramen is important for reducing the chances of reinfection. Bioceramic (calcium silicate) sealers are increasingly used due to their sealing properties and bioactivity.


A calcium silicate sealer is a great choice as it rejuvenates the dentine by drawing out water to create hydroxyapatite to offer a permanent seal from the lateral canals and the apex. These sealers also tend to expand while setting, meaning you may be able to utilise the single cone technique. Calcium silicate sealers also create an alkaline environment, aiding further disinfection for a couple of weeks after treatment. 


If you would prefer an alternative to calcium silicate, a resin-based sealer is also a great option. These sealers are not resorbing, reducing the chance of reinfection. 


8. Obturating


The final step in the endodontic process involves filling the root canals with a biocompatible material, typically gutta-percha, a rubber-like substance. Specialised instruments are used to fill the canals with this material and then seal them with a temporary filling until a permanent restoration, such as a crown, can be placed on the tooth. 


Technique selection, whether cold or warm obturation, should be guided by canal anatomy and clinician preference.


image-container
When should you use cold vs warm obturation?
Cold obturation can be suitable when using gutta-percha points with a bioceramic sealer for a controlled, efficient technique. Warm obturation may be preferred where greater adaptation is needed, using heated devices to support the downpack and backfill stages. The best choice depends on canal anatomy, case complexity, and the clinician’s preferred workflow.
It is vital that the filling material is inserted correctly and that the tooth is sealed effectively for the success and longevity of the treatment. 


EdgeEndo and TotalFill have a great choice of gutta-percha points for cold obturation, which can be ideal when used alongside a bioceramic sealer. 


If you prefer a heated obturation method then the EdgePack and EdgeFlow devices offer a complete solution with simple-to-use, standalone devices for both the downpack and backfill elements of the procedure.  


Alternatively, Henry Schein’s own range of gutta-percha points are flexible and reliable, creating a protective layer over the canal that keeps bacteria and debris from interfering. 


The gutta-percha material is biocompatible, making it safe to leave inside the tooth.


Discover the gutta-percha points range
9. Restoration
Following successful obturation, the final stage of the endodontic workflow is restoring the tooth to full function and aesthetics. This step is essential in ensuring the long-term success of the treatment, as even a well-executed root canal can fail if the coronal seal is compromised.


A strong, durable restoration protects the remaining tooth structure from fracture while preventing bacteria from re-entering the canal system. Depending on the clinical situation, this may involve a direct restoration or a more complex solution such as a crown.


It is important to minimise the time between obturation and final restoration, as delays can increase the risk of contamination and compromise treatment outcomes. By planning the restoration early in the workflow, you can ensure a smoother and more predictable treatment process.


At Henry Schein, we offer a wide range of restorative materials and solutions to support you in achieving a reliable coronal seal and long-lasting results for your patients. Shop our restorative products here.
The Restoration Workflow
Discover Henry Schein solution for a seamless restorative workflow, enabling you to complete strong and long-lasting dental restorations every time.
10. Retreatment And Managing Complications
While many endodontic treatments are successful, there are cases where retreatment may be required. This can occur when infection persists, new symptoms develop, or when initial treatment has not fully addressed the complexity of the canal system.


Common causes of endodontic failure include:


    
    
  • Missed or untreated canals.
    • 
    
  • Incomplete disinfection.
    • 
    
  • Poor obturation or sealing.
    • 
    
  • Coronal leakage due to restoration failure.
    • 



Retreatment involves carefully removing existing filling materials, recleaning and shaping the canals, and addressing any previously untreated anatomy. This process can be more complex than primary treatment and often requires enhanced visualisation and precision.


Using magnification, advanced imaging, and specialised instruments can help improve outcomes in these cases, allowing you to identify challenges more clearly and treat them effectively.


If you’re unsure which products would be best suited to you, our dedicated experts can help. Contact us here.
Shopping With Henry Schein
Learn why dental professionals across the globe choose Henry Schein as their trusted healthcare solutions provider, for more than just dental supplies.
11. Workflow Efficiency and Clinical Optimisation
As endodontic techniques and technologies continue to evolve, there is an increasing focus on improving efficiency without compromising clinical outcomes. A well-optimised workflow allows you to work more predictably, reduce chair time, and enhance the overall patient experience.


By reviewing each stage of the endodontic process, there are opportunities to streamline your approach. This may include selecting instrumentation systems that reduce the number of steps required, or integrating devices that combine multiple functions, such as motors with built-in apex locators.


In suitable cases, single-visit endodontics may offer additional efficiencies, reducing the need for multiple appointments while maintaining high standards of care.


Consistency is also key. Using systems and protocols that you are familiar with can help reduce variability and improve confidence across different case types.


 
 Trustpilot 
 
FAQs
The endodontic workflow typically includes diagnosis, magnification, access, shaping, irrigation and debridement, drying, sealing, obturation, and final restoration. Each stage supports the next, so a structured approach helps clinicians work more efficiently, reduce procedural risk, and achieve more consistent outcomes for patients.
Radiographs are required for reliable endodontic diagnosis, and CBCT can be considered in more complex cases where additional detail is needed. This may include cases with complex anatomy, retreatment requirements, suspected additional canals, or when conventional imaging does not provide enough information to support confident treatment planning.
Magnification supports accurate visualisation of the pulp and canal system, helping clinicians locate and treat canals more effectively. Microscopes are an important tool for improving clarity during endodontic procedures, particularly where internal anatomy is difficult to see or where precision is critical.
Access should allow clear entry to the pulp chamber and root canal system while preserving as much tooth structure as possible, using burs to gain initial access and enlarge the access cavity for cleaning and shaping. Modern access preparation requires balance: clinicians need sufficient visibility and straight-line access without unnecessarily weakening the tooth.
Shaping should remove pulp tissue, bacteria, and debris while maintaining the original canal anatomy as much as possible. Having a range of files available can enable clinicians to select the most suitable option for different canal shapes. Flexible K-files are a good choice for glide path creation, and heat-treated NiTi files are ideal for shaping canals of varying complexity.
Irrigation and debridement help remove remaining pulp tissue, bacteria, and debris after shaping, preparing the canals for filling. Sodium hypochlorite can support disinfection, while EDTA can remove the smear layer and enhance the disinfection process. Effective irrigation depends on methodical cleaning, safe delivery, appropriate solution choice, and – in more advanced workflows – activation where suitable.
After cleaning and shaping, canals should be dried thoroughly before sealing and filling. Absorbent paper points help prepare the canal for sealer placement, while sealers help reduce the chance of reinfection by sealing accessory canals, lateral canals, and the apical foramen. Obturation then fills the root canals with a biocompatible material such as gutta-percha, helping protect the canal system from bacteria and debris.
Henry Schein offers products across the endodontic workflow, including diagnostic imaging, microscopes, access instruments, files, irrigation solutions, drying points, sealers, gutta-percha, and obturation devices. But more than just a supplier, they also support clinicians from diagnosis through to obturation, helping practices select trusted solutions that suit their preferred techniques and support consistent patient outcomes.